Search
Browse by Manufacturer
Browse Categories


Rosco Fluorescent Test Kit


Price: $58.20
Item Number: W769
Manufacturer: Rosco
Manufacturer Part No: 1500 5700 0KIT
Brilliant fluorescent paint colors by Rosco.

Available in brighter than normal colors which fluoresce vividly under ultraviolet lights, Rosco Fluorescent paints can create a wide range of exciting effects. They can be used to create special effects using ultraviolet Blacklight or combined with other Rosco paints to make normal colors more vibrant. Fluorescents use the same high quality, water base, vinyl acrylic binder found in Off Broadway paints. It is suitable for use on most surfaces and for interior and exterior* applications. Try using Rosco Fluorescent paints when matching the brightest colors in the Pantone Color Matching System or to achieve astounding 3-D effects.
  • Finish: Matte
  • Solvent: Water
  • Binder Type:Vinyl
  • Acrylic Dilution: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
  • Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic color effects.
  • Application: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
  • Film Thickness: 2 mil. dry film.
  • Coverage: Approximately 300 sq. ft. per gallon.
  • Average Dry Time: At 75°F (24°C). Dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
  • Clean-up Soap and water.
  • Shelf Life Minimum 24 months.
  • Packaging: 9 - 1oz. containers
  • Fluorescent pigments will degrade from prolonged exposure to ultraviolet light. Avoid direct sunlight where possible.
  • Invisible Blue is a milky white paint that fluoresces to a pale blue under blacklight. When painted over light colored surfaces, Invisible Blue is difficult to detect. However, it can be seen when painted over dark or black colors.
NOTE: Colors shown are computer approximations. Actual color may vary.

CAUTION: Do not apply when surface or air temperatures are below 50°F. Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.


All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.

Related Products

Rosco VividFX UV Paint
Price: From $40.95 to $45.45
Sale Price: From $36.86 to $40.91
Rosco VividFX UV Paint
VividFX, an ultra-violet special effects paint represents a spectacular development for special effects. Formulated using the highest quality fluorescent pigments to create unparalleled combination of colors, coverage, fluorescence, and versatility.
Rosco Fluorescent Paint
Price: From $43.85 to $47.00
Sale Price: From $39.47 to $42.30
Rosco Fluorescent Paint
Brighter than normal colors which fluoresce vividly under ultraviolet lights, Rosco Fluorescent paints can produce some exciting effects. Create special effects using ultraviolet Blacklight or combine with other Rosco paints to make colors more vibrant.