Go-Lite 50' 6-Wire RJ-11 Cable

The RJ-11 cable required to connect between GO-LITE cubes and the 4-way Manual Controllers. Features a six-wire telephone cable with RJ-11 6P6C. **CAUTION: This is the same 6-pin connector used in household telephones but household telephone cable only has four wires and will not work.) You must use the multiple phone connector wire often used in office spaces. These have all 6 of the connections completed and therefore are 6-pin and 6-wire configurations. **CAUTION: If you accidentally reverse the one or more GO-LITE cube connection, that unit will not respond correctly as well as the entire GO-LITE SYSTEM. If red and blue indicator lights come on when all switches are in "Off" position, one or more of the GAM GO-LITE cubes are incorrectly connected. In addition to the two lights on the Controller, the blue LEDs of each incorrectly wired cube lights. This will quickly identify which cube is miswired. (CAUTION - Do not leave the Power Supply on for long periods of time with incorrectly wired cubes, damage may occur)